Checkout this video:
How to remove the band
Before you remove the band from apple watch make sure that you have the right size band for your wrist. If the band is too loose, it could fall off your wrist and get lost. If the band is too tight, it could cause discomfort. The right size band will be snug but not too tight, and you should be able to insert two fingers between the band and your wrist.
Locate the release button
The release button is located on the underside of apple watch in between the bottom of the case and the band. To find it, look for a small indentation.
If your band is attached to the 38mm case, press and hold the release button, then slide the band across to detach it. If your band is attached to the 42mm case, press and hold both release buttons, then slide the band across to remove it.
Push and hold the release button
Push and hold the release button. The band should slide out of the groove. If it’s stuck, try twisting the band while you hold the release button.
Slide the band out of the watch
Slide the band out of the watch. For some bands, you need to press a release button on the back of the watch. If you’re not sure which kind of band you have, see What kind of band does my Watch have?
With the band released, pull from the top of the band toward the bottom of the watch. The band disengages from the watch.
If your band doesn’t release easily, try these steps:
-Press and hold both release buttons at least 10 seconds.
-Tap one or both release buttons again.
How to replace the band
apple watch is a great piece of technology, but it’s not perfect. One of the issues that many people have is that the band can be difficult to remove. If you’re having trouble removing the band from apple watch don’t worry, we’re here to help. In this article, we’ll show you how to replace the band on your Apple Watch.
Align the band with the watch
1. Align the band with the watch so that the band’s connectors are facing the bottom of the watch.
2. Firmly press and hold the release button, then slide the band across to release it from the watch.
3. If your band has a buckle, unbuckle it now.
Push the band into the watch
Use your finger to push the top of the band into the watch. The band should click into place.
Release the button
To remove your band, press and hold the release button on the underside of the watch. The band should slide out of the notches on either side of the case. If it’s tight, wiggle the band back and forth until it slides free. If you can’t press and hold the release button, you may need to use a small, flat tool to pry open the case.
##Release the band
Once you’ve released the button, slide the band across to remove it from the case. If you’re having trouble removing the band, try wiggling it back and forth until it comes free.
It can be tricky to remove the band from your Apple Watch, but it’s not impossible. With a little bit of patience, you can do it! Here are some tips on how to remove the band from your Apple Watch.
Store the band in a safe place
Be sure to remove apple watch band before showering, swimming, or exercising. If you forget, don’t worry. Rinse it off as soon as you can.
To remove your band:
-Press and hold the release button on the back of your watch.
-Slide the band across to release it.
To put your band back on:
-Align the band with the watch case.
-Slide the band into place until you hear a click.
Do not over-tighten the band
When you put the band on your watch, make sure you don’t over-tighten it. Just snug it up against your wrist — you should be able to insert two fingers under the band. If you can’t, it’s too tight.