Contents
Do you want to know how to make an apple pipe? This blog post will show you step by step how to make a pipe out of an apple.
Checkout this video:
Choose your apple
There are many types of apples, but not all apples are created equal when it comes to pipe making. The type of apple you choose will determine how long your pipe will last, how easily it will light, and how much smoke it will produce. For the best results, choose a red apple with a smooth skin.
Go to the store
You will need to go to the store and buy an apple, a knife, and a small metal bowl. The apple should be fresh, preferably organic. You will also need a screen for your bowl, which you can purchase at a head shop.
Pick out a good apple
Choosing the right apple is very important for making a successful pipe. You want find an apple that is the right size and shape for your needs, and that has a stem that is easy to work with. For the best results, it is also important to find an apple that is not too ripe and not too green. The skin should be smooth, without any bruises or blemishes.
Once you have found perfect apple wash it thoroughly with soap and water to remove any dirt or contaminants. Dry it off completely before you begin working with it.
Cut a hole in the apple
Firstly, you need to cut a hole in the apple. The size of the hole will depend on how much tobacco you want to smoke. If you want to smoke a lot, then you should make a big hole. If you want to smoke a little, then you should make a small hole. Once you have cut the hole, you need to take out the core of the apple.
Get a knife
The first step is to find a sharp knife. A dull knife will not only make this task more difficult, but it could also be dangerous. Once you have a sharp knife, you’ll need to decide how big you want the bowl of your pipe to be. Keep in mind that the bigger the bowl, the more apple you’ll need to smoke.
Next, cut off one end of the apple and twist it to remove the stem. Some people like to keep the stem attached to use as a mouthpiece, but it’s not necessary. Once the stem is removed, use your knife to carve out the inside of the apple, being careful not to puncture the skin. Try to make the bowl of your pipe as deep as possible without puncturing through the bottom.
When you’re finished carving, use a straw or your finger to poke a few small holes in the bottom of the bowl. These holes will allow air to flow into your pipe and help prevent it from getting too hot while you’re smoking. Finally, twist on the mouthpiece and you’re ready to smoke!
Cut a hole in the side of the apple
Use a sharp knife to cut a hole in the side of the apple. The hole should be big enough to fit the bowl of your pipe. Hollow out the inside of the apple with a spoon or your fingers. Be sure to make the bowl deep enough so that you can pack it with tobacco.
poke a hole in the bottom of the apple
Poke a hole in the bottom of the apple with a pen.
Get a toothpick
You’ll need a toothpick or some other sharp object to make the hole. A sewing needle will also work if you don’t have a toothpick. Just make sure that the hole is big enough to fit your marijuana in, but not so big that the apple falls apart.
Poke a hole in the bottom of the apple
Poke a hole in the bottom of the apple with a sharp knife. The size of the hole will determine how much air can get through, so make it as big or small as you like. Cut a small piece off the top of the apple, making sure to leave the stem attached. This will be your bowl. carefully carve out the inside of the bowl, taking care not to puncture the sides or bottom of the apple. when you’re done, you should have a nicely shaped bowl with a stem attached.
Put the bowl piece in the hole on the side of the apple
Cut a hole in the side of the apple with the knife. The hole should be big enough to fit the bowl piece snugly. Next, take the bowl piece and put it in the hole. Make sure it is tight so that air cannot pass through.
Get the bowl piece
You will need a small metal bowl piece to use as your pipe’s bowl. A good way to find one is to go to a local smoke shop and ask if they have any spare parts for apple pipes. If they don’t, you can also look online for a metal bowl piece that will fit onto the side of an apple. Once you have your bowl piece, it’s time to get started on making your pipe!
1.start by finding a ripe apple that is big enough to fit the bowl piece on the side. Once you have found an apple that meets these criteria, wash it off with some water to get rid of any dirt or residue that may be on the surface.
2. Take a sharp knife and make a small cut around the edge of the chosen side of the apple. Be careful not to cut yourself!
3. Insert the bowl piece into the hole you just made. Once it is in far enough, twist it slightly so that it is snugly in place.
4. Your apple pipe is now ready to use! Pack the bowl with your favorite smoking material and light up. Enjoy!
Put the bowl piece in the hole on the side of the apple
Once you have the bowl, you need to put it in the hole on the side of the apple. If the hole is too small, you can use a sharp knife to enlarge it. Make sure that the bowl piece is securely in place before proceeding to the next step.
Put the stem in the hole on the bottom of the apple
Having an apple pipe is a right of passage for any pot smoking enthusiast. They’re easy and cheap to make, plus they hit pretty damn well. The first step is finding the perfect apple. You’re looking for an apple that is the right size for your bowl, and has a good sized hole in the bottom. Once you’ve found your apple, it’s time to get to work.
Get the stem
The first step is to get the stem out of the apple. You can do this by using a sharp knife or by poking a hole in the bottom of the apple with your finger and then pulling the stem out.
Put the stem in the hole on the bottom of the apple
Remove the stem from the apple using a knife or your fingers. The stem should come out easily, leaving a small hole in the center of the apple.
Push the stem back into the hole in the bottom of the apple. The stem should fit snugly in the hole.
Twist the stem to make a tight seal. The seal is important because it will prevent air from entering the apple and ruining your smoke.
Your apple pipe is now ready to use!
