Contents
Learn how to make apple pen with this easy to follow guide.
Checkout this video:
httpv://youtu.be/https://www.youtube.com/shorts/POUf2rO6xAQ
Supplies
You will need the following supplies to make your apple pen: 1 apple, 1 pen, 1 knife.
Apple
You will need the following supplies to make an apple pen:
-1 apple
-1 pen
-1 knife
Instructions:
1. Cut the apple in half with the knife.
2. Remove the pen cap and place the pen tip into one of the apple halves.
3. Push the pen tip into the apple until it is snug.4. Cut off any excess apple with the knife, if necessary.5. Put the pen cap back on and you are ready to write with your new apple pen!
Pen
You will need a couple things to make this pen: an apple, a pen, and a knife.
First, you will need to cut the apple in half using the knife. Make sure to remove the stem and seeds from the apple half that you will be using as the pen. Next, take the pen and insert it into the open end of the apple half. The apple should fit snugly around the pen.
That’s it! You now have a homemade apple pen.
Steps
Apple pens are a great way to add a personal touch to your messages. They’re also environmentally friendly and easy to make! This guide will show you how to make your own apple pen step-by-step.
Cut the apple in half
Use a sharp knife to cut the apple in half crosswise, making sure to cut through the stem. If you want, you can cut off the bottom of the apple so it will sit flat when you slice it.
Carve out a small hole in the center of one half of the apple
Using a paring knife,start at the blossom end of the apple and carved out a small hole in the center of one half of the apple. This will be the opening of your “pen.” Try to make the opening about 1/2-inch wide so that it’s big enough to fit a regular size pen or pencil. You can also make the opening a little bigger or smaller, depending on what type of writing utensil you want to use. Just keep in mind that a larger opening will mean that your “pen” won’t last as long.
Insert the pen into the hole
-Locate the hole on the side of the apple. It should be close to the stem.
-Gently insert the pen into the hole until it is about halfway in.
-If the pen is too tight or too loose, you can adjust it by twisting it slightly.
Results
After testing out different ways to make an apple pen, we’ve found that best way is to use a sharp knife to cut the apple in half, then use aPen to carve out a small hole in the center of the apple. Next, use a sharp knife to make a small cut around the edge of the hole. Finally, use a pen to insert the apple into the hole.
Enjoy your new apple pen!
After you’ve completed the steps above, you should have a working apple pen! If your pen doesn’t seem to working properly here are a few things to check:
-Make sure the apple is firmly inserted into the pen body. If it’s loose, the pen may not work properly.
-If the pen still isn’t working, try removing the apple and reinserting it. Sometimes this can help fix any issues.
-If you’re still having trouble, try using a different type of apple. Some apples work better than others in these pens.
We hope this guide has helped you make your very own apple pen!
