Contents
Here’s how you can identify which apple watch you have, and the differences between Series 1, 2, and 3.
Checkout this video:
Introduction
Apple offers a wide range apple watch models each with its own set of features and specifications. It can be difficult to keep track of all the different versions, especially if you’re trying to buy or sell a apple watch
In this article, we’ll run through all the different Apple Watch models that have been released so far and explain how you can tell them apart. By the end, you’ll know exactly which Apple Watch you have and what version it is.
Different types of Apple Watches
The Apple Watch comes different types each with its own set of features. The first type is the Sport, which is the most basic model. It is made of aluminum and has a plastic strap. The second type is the Steel, which is made of stainless steel and has a metal strap. The third type is the Edition, which is the most expensive and is made of gold.
Series 3
The Apple Watch Series 3 is the third-generation model of the Apple Watch with cellular and GPS capabilities, released on September 22, 2017. Its outward design is identical to the Series 2, with the addition of a red digital crown. The new W3 wireless chip supports Bluetooth 4.2 and LTE connectivity. The watch is available in GPS-only and GPS + Cellular versions.
The Series 3 was originally advertised as having 18 hours of battery life, but a later software update reduced that to 16 hours. When used for fitness tracking, music playback, and phone calls over LTE, the Series 3 was reported to last around 4–6 hours on a full charge. A review from iLounge praised the Series 3’s battery life as “very solid”, while another from CNET found it to be “just average”.
Series 4
The Apple Watch Series 4 is the latest version of the smartwatch from Apple. It was released on September 21, 2018. It has a larger display, a faster processor, and updated sensors. The Series 4 also has a new design with a square case and rounded corners. It is available in two sizes: 40 mm and 44 mm.
The Series 4 has GPS and LTE connectivity. It runs watchOS 5, which was released on September 17, 2018. The Series 4 is compatible with the iPhone 5s or later running iOS 12 or later.
The Series 4 starts at $399 for the 40 mm model and $499 for the 44 mm model.
Series 5
The Apple Watch Series 5 was released in September of 2019. It is available in 40mm and 44mm case sizes. The Series 5 features an Always-On Retina display, which allows you to see the time and other information without Raise to Wake or Tap to Wake. It also has a built-in compass and an international emergency calling feature. The battery life is the same as the Series 4, but it does have a new low power mode for when you’re not using the Always-On display.
The Apple Watch Series 5 is available in Aluminum, Stainless Steel, Ceramic, and Titanium case materials. There are also Hermès and Nike+ editions available. start at $399 for the GPS model and $499 for the GPS + Cellular model.
How to determine which Apple Watch you have
You can determine which Apple Watch you have by looking at the model number on the back of the watch. The model number is located under the “Apple Watch” branding. It will start with “A” and then followed by a four digit number. If your watch says “Series 1” on the back, then you have an Apple Watch Series 1. If it says “Series 2” then you have an Apple Watch Series 2, and so on.
Check your watch’s model number
On the back of your watch, look for the model number. To find the model number, use the steps for your device:
Apple Watch Series 6: Press and hold the side button to see the model number.
Apple Watch SE: Press and hold the side button to see the model number.
Apple Watch Series 5: Press and hold the side button to see the model number.
Apple Watch Series 4: Lift your watch to wake it, then swipe up from the bottom of your watch face to open Control Center. Tap Settings > General > About, then look for Model.
Apple Watch Series 3: Lift your watch to wake it, then swipe up from the bottom of your watch face to open Control Center. Tap Settings > General > About, then look for Model.
Apple Watch Series 2 or earlier: On your iPhone, open AppleWatch > My Watch (iOS 11) or My Clock (iOS 10), tap general > About. Look for Model.
Compare your watch to pictures of each type of watch
To find out which generation of watch you have, use these guidelines:
-Generation 1 and 1st-generation Apple Watch Sport: 38mm or 42mm case
-2nd-generation Apple Watch and 2nd-generation Apple Watch Nike+: 38mm or 42mm case
-3rd-generation Apple Watch and 3rd-generation Apple Watch Nike+: 40mm or 44mm case
4th-generation Apple Watch and 4th-generation -Apple Watch SE (GPS): 40mm or 44mm case
Conclusion
The Series 4 is the newest model, and it’s likely the one you want if you’re buying an Apple Watch for the first time. It has a larger display than previous models, so it’s easier to see and use, and it has new health features, like an ECG sensor, that could be lifesavers.
If you’re looking for something a little cheaper, the Series 3 is still a great option. It doesn’t have the ECG or other health features of the Series 4, but it’s still a very capable smartwatch.
The original Apple Watch is now three years old, but it’s still available for sale at a reduced price. If you’re on a budget, this could be a good option, but be aware that it doesn’t have some of the features that are now standard on the Apple Watch, like GPS and water resistance.
