Contents
A step-by-step guide on How to apple tv including what you need and how to set it up.
Checkout this video:
Introduction
In this article, we’ll show you how to apple tv We’ll go over the different ways to set up your new Apple TV, including wired and wireless options. We’ll also touch on a few other topics, like how to update your software and troubleshoot common problems.
What you need
Before you begin, here’s what you need:
-An Apple TV 4K apple tv hd streaming device with the latest version of tvOS.#/>
-A compatible television or projector (for Apple TV 4K, you also need a HDMI 2.0-compatible television or receiver).
-An Ethernet network (for Apple TV 4K, you can also use Wi-Fi).
-A high-speed Internet connection (WiFi or wired).
-An iPhone, iPad,ipod touch with the latest version of iOS.
-The latest version of Xcode.
Instructions
If you want to install Apple TV, you’ll need to download the software from the Apple website. Once you have the software, you can either install it using a USB cable or by using a wireless connection. We’ll go over both methods so you can choose the one that’s best for you.
Connecting the power cord
1.Start by connecting the power cord to the back of your Apple TV.
2.Then plug the other end of the power cord into an electrical outlet or a surge protector.
3.If you’re using a surge protector, make sure that it’s turned on.
Connecting HDMI
1.If your TV has an HDMI port, plug your Apple TV into the HDMI port on your TV using an HDMI cable (for 4K HDR content, you may need a compatible ultra high-speed HDMI cable).
2.If you have soundbar or AV receiver, plug it into your TV before you connect your Apple TV.
3.If you see apple tv home screen congrats! If not, check your connections and make sure that your television is set to the correct input.
What to do if you have an older TV
If you have an older TV, you will need to use an HDMI to composite adapter.
Setting up Apple TV
To get started with your new Apple TV, you need to connect it to your TV and power. If you have an optical audio port on your TV, you can also connect it to your Apple TV.
Activating Apple TV
The activation process for your Apple TV 4K or Apple TV HD is built into iOS 11 and later and tvOS 11 and later. It’s designed to be simple and straightforward so you can get started watching your favorite shows and movies as quickly as possible.
To activate your Apple TV, make sure that it’s connected to your television, then follow these steps:
-Open settings app on your iOS device.
-Tap General.
-TapHandoff.
-Turn on Handoff.
-On your Apple TV, go to Settings > General >Remotes.
-Select Set Up new Remote.
A four-digit code will appear on your television screen.
On your iOS device, open the Remote app, then enter the four-digit code when prompted.
Setting up Wi-Fi
Assuming you already have your Apple TV unboxed and plugged into your TV, the first thing you’ll want to do is set it up for use on your home Wi-Fi network. The process for doing this is pretty simple and straightforward, and consists of the following steps:
1. On your Apple TV, open settings app
2. Select “Network” from the list of options.
3. Select “Wi-Fi” from the list of options.
4. Select your home Wi-Fi network from the list of available networks.
5. Enter your Wi-Fi password when prompted, then select “Join.”
6. Once you’ve joined your Wi-Fi network, you should see a checkmark next to its name indicating that it’s been successfully connected to your Apple TV.
Setting up AirPlay
AirPlay is a proprietary protocol stack/suite developed by Apple Inc. that allows wireless streaming between devices of audio, video, device screens, and photos, together with related metadata. Originally implemented only in Apple’s software and devices, it was called AirTunes and used for audio only. It is now an open specification. Its name signifies that it is a technology allowing multi-room or simultaneous playback (hence the pluralization of AirTunes). It has been described as “effortless” and “magical”.[1]
There are three types of AirPlay-enabled devices:
* Apple TV: A set-top box running a special version of iOS with support for various audio/video output options including HDMI, optical audio, and Dolby Digital 5.1 surround sound pass-through.
* Airport Express: A small computer used to create an AirPort wireless network in a home or small office, feed an existing network, or extend the range of an existing network. It also includes a line-level analog stereo output jack (mini-jack) which can be used to connect headphones directly or feed a sound system; it can also act as the source for an AirPlay system (referred to as an “AirPort speaker”).
* iMac G5 and later and Intel-based eMac: Desktops manufactured after August 2004 that have built in speakers and include a mini-jack output which can be used like the Airport Express to connect headphones directly or feed a sound system. They also include Airport Extreme cards which allow them to act as the base station for other computers on the network or extend its range; however every time airport extreme mode is enabled on one computer’s airport card all other connected airport cards will be disabled (preventing other computers from sharing that connection).ithout another computer acting as the base station. In order to stream music from more than one source simultaneously on these machines additional airport express units must be added to the network acting either as sources themselves OR configured in bridge mode which essentially turns them into Ethernet over USB adapters since they lack any sort of internal storage or processors besides what’s necessary for networking.[2] The late 2009 iMac desktop computers introduced an SD card slot which allows iOS devices such as iPods/iPhones/iPads to share their music libraries with these computers sans wires using iOS 4’s “SD Card Access” feature; however this uses up one of the two USB ports available on these machines. The video playing capabilities are not built into the SD slot so videos cannot be watched wirelessly this way unless they are first transferred onto the computer’s hard drive.[3]
Mac mini (Core 2 Duo) and early 2008 MacBook Pro: Both models have line level audio outputs that can connect straight into an amplifier like those found on stereo receivers or AV receivers; however, they do not have any way to transmit video unless connected directly to a television via HDMI or DVI (the latter using Apple’s Mini Display Port to DVI Adapter). The early 2006 Intel iMacs also had this capability but it was removed in the late 2006 revision which uses integrated graphics that lack any sort of external video output port.[4][5] MacBooks introduced in late 2008 and early 2009 have both Mini DisplayPort and HDMI outputs allowing them to send both audio and video signal wirelessly using Apple TV; however, those without discrete graphics will downscale videos played back 1080p HD content to 720p due to lack of pixel processing power).[6]
All generations of iPod Touch, iPhone 3G S+, all iPad models: These devices contain chipsets capable of sending audio wirelessly using AirPlay directly to second generation+ Apple TVs or any compatible standalone speaker dock; however, only those with iOS 4.2 or later installed can take advantage significantly improving latency issues that were inherent when trying this with prior versions of iOS. The sending device must also be within range of either the destination device OR a wireless router connected to it unless both devices are within range of each other; when connecting wirelessly using 3G/EDGE cellular data networks there will be increased latency but usually not enough so as to make synchronization with any form visuals unnoticeable.[7][8][9] Prior versions of these devices could only play audio via airplay if jailbroken due partly because 3rd party applications were necessary in order for such older hardware run iOS 4 fast enough and partly because support for airplay wasn’t added into older versions IOS until developers started taking advantage features made available Jailbreaking.[10][11][12]
iTunes 10.1 software update released January 28 2011 added support for iOS 4.2 allowing users with compatible iPhone/touch/iPad models running 4.2 connect their device wirelessly directly Over The Air sync new content purchased from iTunes Store provided their computer running latest version iTunes runs Windows XP SP3 Service Pack 3 later Windows Vista 7 8 10 OS X Snow Leopard 10
Conclusion
You’ve now learned how to install Apple TV. Be sure to follow the instructions carefully to ensure a successful installation. Thanks for reading!
