How to Clean Your Apple Earbuds

If your Apple earbuds have seen better days, check out this quick and easy guide on how to clean them and get them looking like new again.

Checkout this video:

Supplies

To clean your Apple Earbuds, you will need the following supplies: rubbing alcohol, cotton swabs, and a soft, lint-free cloth.

Gather your supplies: toothbrush, toothpick, cotton swabs, and rubbing alcohol.

Toothbrush – An old toothbrush is perfect for this job. If you don’t have an old one laying around, any soft-bristled brush will do.

Toothpick – You’ll need a toothpick to get into the tiny crevices of your earbuds. If you don’t have a toothpick, you can use a paperclip or a sewing needle. Make sure whatever you use is clean!

Cotton Swabs – Cotton swabs (or Q-tips) are useful for wiping away debris and for applying rubbing alcohol to the earbuds.

Rubbing Alcohol – Rubbing alcohol will help to kill any bacteria that may be living on your earbuds. It’s also a good way to remove any stubborn dirt or grime.

Remove the Earbud Covers

Apple earbuds are great because they are small, lightweight, and easy to use. They come with a little cover that goes over the earbud to keep it clean. However, these covers can get lost or damaged. If you need to clean your apple earbuds, you can follow these steps.

Use a toothbrush to remove any dirt or debris from the crevices on the earbud covers.

Use a toothbrush to remove any dirt or debris from the crevices on the earbud covers. Be sure to use a gentle back and forth motion so you don’t damage the earbuds.

If you see any residue on the earbud covers, dampen a cotton swab with rubbing alcohol and gently wipe away the residue.

Once you’ve removed all of the dirt and debris, rinse the earbud covers with clean water and dry them with a soft, lint-free cloth.

Use a toothpick to remove any dirt or debris from the crevices on the earbud covers.

If you’re using Apple earbuds, you know how easy it is for the covers to get dirty. Here’s a quick and easy way to clean them:

1. Use a toothpick to remove any dirt or debris from the crevices on the earbud covers.
2. Dip a cotton swab in rubbing alcohol and wipe away any remaining dirt or debris.
3. Let the earbud covers air dry before reattaching them to your earbuds.

Clean the Earbuds

If you use your Apple earbuds regularly, they can become dirty and no longer work as well. In this article, we’ll show you how to clean your Apple earbuds and get them working like new again.

Dip a cotton swab in rubbing alcohol and use it to clean the earbuds.

Dip a cotton swab in rubbing alcohol and use it to clean the earbuds. You can also use a cotton swab dampened with water.

Use a toothbrush to remove any dirt or debris from the crevices on the earbuds.

Use a toothbrush to remove any dirt or debris from the crevices on the earbuds. If you can’t get the dirt out with the toothbrush, try using a cotton swab. Be sure to brush gently so you don’t damage the delicate parts of the earbuds.

Once you’ve removed all the visible dirt, it’s time to clean the earbuds themselves. For this, you’ll need some warm water and a mild soap. Wet a cotton swab with soapy water and gently wipe down the earbuds. If you have stubborn dirt that won’t come off, try using a toothpick or other sharp object to lightly scrape it away. Once you’re satisfied that the earbuds are clean, rinse them off with clean water and dry them with a soft cloth.

Replace the Earbud Covers

If you’ve had your earbuds for a while, it’s likely that the rubber or silicone covers have started to deteriorate. When this happens, it’s not only unsightly, but it can also be uncomfortable and can cause the earbuds to not fit as snugly in your ear. Fortunately, it’s easy to replace the earbud covers.

Replace the earbud covers and Enjoy your clean earbuds!

Welcome back to another episode of “How to clean your Apple earbuds”! Today we will be focusing on how to replace the earbud covers.

First, you will need to gather the following materials:
-A new set of Apple earbud covers
-Scissors
-A small Phillips head screwdriver
-A bowl or cup of hot water
-A towel

Next, we will go over the steps on how to replace the earbud covers:
1.Start by heating up a bowl or cup of water, it doesn’t need to be boiling just hot enough so that you can comfortably dip your hand in it.
2.While the water is heating up, take your old earbud covers and use the scissors to cut off the bottom where the white plastic is located. Be careful not to cut too close to the wire.

![Image result apple watch teardown diagram](https://i.ytimg.com/vi/1tV7ozFxZ68/maxresdefault.jpg) 3.Once you have cut off the bottom of the old earbud cover, use the small Phillips head screwdriver to unscrew the two screws that are holding on the metal piece that goes over the top of the wire.

4.After you have unscrewed both screws, you can now remove the metal piece and throw it away. 5.Now take your new earbud cover and dip it in the hot water for a few seconds just so that it becomes flexible enough to work with. 6.Once it isflexible enough, put it overthe wire making sure thatthe small raised portion is facing up and then use your fingers topush down aroundthe entire circumference untilit snaps into place. 7.Use athumbtoconnect both halvesofthe coverandthenusethe small Phillips head screwdriverto put both screwsback in placeandtighten themdown snuglybutdon’ttighten themtoo muchoryou may strip outthe plasticandthen you’ll havea real messon your hands! 8.Andthat’s it! Nowyou have anew setofclean and sparkly Apple earbuds tobetter enjoyyour musicwith!

Scroll to Top